Phillips 66® Type A Aviation Oil is an ashless dispersant, single-grade engine oil specially formulated for use in aircraft piston engines. The ashless dispersant formulation helps minimize the formation of engine sludge, varnish, piston deposits and combustion chamber deposits, resulting in a much cleaner engine compared with the use of straight (non-dispersant) mineral oils.
• Ashless dispersant helps minimize engine sludge and varnish deposits for a cleaner engine
• High film strength for protection against wear and piston scuffing
• Protects against rust and corrosion
• Formulated with the same high-quality base oils as used in Phillips 66® X/C®Aviation Oil
• Opposed piston aircraft engines that require an SAE 50 or Commercial Grade 100 engine oil (Type A 100AD)
• Radial piston aircraft engines that require an SAE 60 or Commercial Grade 120 engine oil (Type A 120AD)
Type A Aviation Oil meets the requirements of:
• Avco Lycoming Material Specification No. 301G
• Pratt & Whitney Service Bulletin No. 1183 Rev. U
• SAE Standard J1899
• Teledyne Continental Material Specification MHS-24B
• U.S. Military Specifi cation MIL-L-22851D (obsolete) for additive treatment
QPL Approval Numbers: D07L1-50 (Type A 100AD), D07L1-60 (Type A 120AD)
| Grade | 120AD |
| SAE Grade | 60 |
| Gravity, °API | 0.887 |
| Specific Gravity @ 60°F | 7.39 |
| Density, lbs/gal @ 60°F | 4 |
| Color, ASTM D1500 | 4 |
| Flash Point (COC), °C (°F) | 266 (511) |
| Pour Point, °C (°F) | -27 (-17) |
| Viscosity, Kinematic | |
| cSt @ 40°C | 257 |
| cSt @ 100°C | 23.4 |
| Viscosity Index | 113 |
| Acid Number, ASTM D664, mg KOH/g | 0.15 |
| Ash Content, SAE J1787, wt % | Nil |
| Copper Corrosion, ASTM D130 | Pass |
| Foam Test, ASTM D892 | Pass |
Type A Aviation Oil meets the requirements of:
• Avco Lycoming Material Specification No. 301G
• Pratt & Whitney Service Bulletin No. 1183 Rev. U
• SAE Standard J1899
• Teledyne Continental Material Specification MHS-24B
• U.S. Military Specifi cation MIL-L-22851D (obsolete) for additive treatment
QPL Approval Numbers: D07L1-50 (Type A 100AD), D07L1-60 (Type A 120AD)
| Grade | 100AD |
| SAE Grade | 50 |
| Gravity, °API | 28.5 |
| Specific Gravity @ 60°F | 0.884 |
| Density, lbs/gal @ 60°F | 7.36 |
| Color, ASTM D1500 | 3.5 |
| Flash Point (COC), °C (°F) | 256 (493) |
| Pour Point, °C (°F) | -27 (-17) |
| Viscosity, Kinematic | |
| cSt @ 40°C | 204 |
| cSt @ 100°C | 20.2 |
| Viscosity Index | 115 |
| Acid Number, ASTM D664, mg KOH/g | 0.15 |
| Ash Content, SAE J1787, wt % | Nil |
| Copper Corrosion, ASTM D130 | Pass |
| Foam Test, ASTM D892 | Pass |
