Phillips 66® Turbine Oil is a very high quality, rust and oxidation (R&O)-inhibited circulating oil developed for use in industrial steam turbines, rotary air compressors, and many other industrial applications. It is specially formulated to provide a very high level of oxidation resistance for long service life.
• Excellent oxidation resistance and thermal stability for long service life
• Protects against sludge and varnish formation
• Protects against rust and corrosion
• Excellent water-separating properties
• Low carbon-forming tendency for use in air compressors
• Good foam resistance
• Direct-drive steam turbines and hydroelectric turbines
• Air tools and other pneumatic equipment lubricated through air line lubricators
• Centrifugal and rotary air compressors
• Lightly loaded enclosed gear drives where the OEM specifies a R&O type oil (ISO VG 68, 100)
• Electric motor bearings, fan bearings, and blower bearings
• Vacuum pumps, deep-well water pumps, and machine tools
Turbine Oil meets the requirements of the following industry and OEM specifications:
• ABB G12106
• Alstom Power HTGD 90 117, for turbines without gear drives
• Ansaldo Energia AE94.3A & AE94.2 without gear drives (ISO VG 46) (approved)
• ANSI/AGMA Standard 9005-E02, R&O Inhibited Oils
• ASTM D4304-06a, Type I Turbine Oil
• British Standard 489
• China National Standard GB 11120-2011 L-TSA (ISO VG 32 & 68) (approved)
• Denison Hydraulics HF-1
• DIN 51515 Part 1, Lubricating Oils, Type L-TD
• DIN 51517 Part 2, Lubricating Oils, Type CL
• DIN 51524 Part 1, Hydraulic Oils, Type HL
• General Electric GEK 46506e, GEK 32568j, GEK 27070 (obsolete), GEK 28143b (obsolete)
• Siemens Power Generation TLV 9013 04, TLV 9013 05
• U.S. Military MIL-PRF-17672D, Symbol 2075 T-H (ISO VG 32), 2110 T-H (ISO VG 46), 2135 T-H (ISO VG 68)
• U.S. Steel 126
| ISO Grade | 32 |
| AGMA Grade | 0 |
| Specific Gravity @ 60°F | 0.862 |
| Density, lbs/gal @ 60°F | 7.18 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 220 (428) |
| Pour Point, °C (°F) | -37 (-35) |
| Viscosity | |
| cSt @ 40°C | 31.8 |
| cSt @ 100°C | 5.4 |
| SUS @ 100°F | 164 |
| SUS @ 210°F | 44.4 |
| Viscosity Index | 103 |
| Acid Number, ASTM D974, mg KOH/g | 0.08 |
| Air Release, ASTM D3427, minutes | 0.8 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >15,000 |
| RPVOT, ASTM D2272, minutes | >1,200 |
| Rust Test, ASTM D665 A&B | Pass |
Turbine Oil meets the requirements of the following industry and OEM specifications:
• ABB G12106
• Alstom Power HTGD 90 117, for turbines without gear drives
• Ansaldo Energia AE94.3A & AE94.2 without gear drives (ISO VG 46) (approved)
• ANSI/AGMA Standard 9005-E02, R&O Inhibited Oils
• ASTM D4304-06a, Type I Turbine Oil
• British Standard 489
• China National Standard GB 11120-2011 L-TSA (ISO VG 32 & 68) (approved)
• Denison Hydraulics HF-1
• DIN 51515 Part 1, Lubricating Oils, Type L-TD
• DIN 51517 Part 2, Lubricating Oils, Type CL
• DIN 51524 Part 1, Hydraulic Oils, Type HL
• General Electric GEK 46506e, GEK 32568j, GEK 27070 (obsolete), GEK 28143b (obsolete)
• Siemens Power Generation TLV 9013 04, TLV 9013 05
• U.S. Military MIL-PRF-17672D, Symbol 2075 T-H (ISO VG 32), 2110 T-H (ISO VG 46), 2135 T-H (ISO VG 68)
• U.S. Steel 126
| ISO Grade | 46 |
| AGMA Grade | 1 |
| Specific Gravity @ 60°F | 0.868 |
| Density, lbs/gal @ 60°F | 7.23 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 232 (450) |
| Pour Point, °C (°F) | -33 (-27) |
| Viscosity | |
| cSt @ 40°C | 46 |
| cSt @ 100°C | 6.7 |
| SUS @ 100°F | 238 |
| SUS @ 210°F | 48.7 |
| Viscosity Index | 97 |
| Acid Number, ASTM D974, mg KOH/g | 0.08 |
| Air Release, ASTM D3427, minutes | 2 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >15,000 |
| RPVOT, ASTM D2272, minutes | >1,200 |
| Rust Test, ASTM D665 A&B | Pass |
Turbine Oil meets the requirements of the following industry and OEM specifications:
• ABB G12106
• Alstom Power HTGD 90 117, for turbines without gear drives
• Ansaldo Energia AE94.3A & AE94.2 without gear drives (ISO VG 46) (approved)
• ANSI/AGMA Standard 9005-E02, R&O Inhibited Oils
• ASTM D4304-06a, Type I Turbine Oil
• British Standard 489
• China National Standard GB 11120-2011 L-TSA (ISO VG 32 & 68) (approved)
• Denison Hydraulics HF-1
• DIN 51515 Part 1, Lubricating Oils, Type L-TD
• DIN 51517 Part 2, Lubricating Oils, Type CL
• DIN 51524 Part 1, Hydraulic Oils, Type HL
• General Electric GEK 46506e, GEK 32568j, GEK 27070 (obsolete), GEK 28143b (obsolete)
• Siemens Power Generation TLV 9013 04, TLV 9013 05
• U.S. Military MIL-PRF-17672D, Symbol 2075 T-H (ISO VG 32), 2110 T-H (ISO VG 46), 2135 T-H (ISO VG 68)
• U.S. Steel 126
| ISO Grade | 68 |
| AGMA Grade | 2 |
| Specific Gravity @ 60°F | 0.873 |
| Density, lbs/gal @ 60°F | 7.27 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 243 (469) |
| Pour Point, °C (°F) | -27 (-17) |
| Viscosity | |
| cSt @ 40°C | 68 |
| cSt @ 100°C | 8.8 |
| SUS @ 100°F | 352 |
| SUS @ 210°F | 55.9 |
| Viscosity Index | 102 |
| Acid Number, ASTM D974, mg KOH/g | 0.08 |
| Air Release, ASTM D3427, minutes | 2 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >15,000 |
| RPVOT, ASTM D2272, minutes | >1,200 |
| Rust Test, ASTM D665 A&B | Pass |
Turbine Oil meets the requirements of the following industry and OEM specifications:
• ABB G12106
• Alstom Power HTGD 90 117, for turbines without gear drives
• Ansaldo Energia AE94.3A & AE94.2 without gear drives (ISO VG 46) (approved)
• ANSI/AGMA Standard 9005-E02, R&O Inhibited Oils
• ASTM D4304-06a, Type I Turbine Oil
• British Standard 489
• China National Standard GB 11120-2011 L-TSA (ISO VG 32 & 68) (approved)
• Denison Hydraulics HF-1
• DIN 51515 Part 1, Lubricating Oils, Type L-TD
• DIN 51517 Part 2, Lubricating Oils, Type CL
• DIN 51524 Part 1, Hydraulic Oils, Type HL
• General Electric GEK 46506e, GEK 32568j, GEK 27070 (obsolete), GEK 28143b (obsolete)
• Siemens Power Generation TLV 9013 04, TLV 9013 05
• U.S. Military MIL-PRF-17672D, Symbol 2075 T-H (ISO VG 32), 2110 T-H (ISO VG 46), 2135 T-H (ISO VG 68)
• U.S. Steel 126
| ISO Grade | 100 |
| AGMA Grade | 3 |
| Specific Gravity @ 60°F | 0.87 |
| Density, lbs/gal @ 60°F | 7.24 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 277 (531) |
| Pour Point, °C (°F) | -24 (-11) |
| Viscosity | |
| cSt @ 40°C | 100 |
| cSt @ 100°C | 11.3 |
| SUS @ 100°F | 522 |
| SUS @ 210°F | 65 |
| Viscosity Index | 99 |
| Acid Number, ASTM D974, mg KOH/g | 0.08 |
| Air Release, ASTM D3427, minutes | 2 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 25 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | >15,000 |
| RPVOT, ASTM D2272, minutes | >1,200 |
| Rust Test, ASTM D665 A&B | Pass |
