Phillips 66® Syncon EP Plus Gear Oil is a premium quality, synthetic, extreme-pressure industrial gear lubricant developed for the lubrication of enclosed gear drives and heavily loaded plain or rolling-element bearings operating at extreme temperatures or in severe service. It is suitable for use over a wider temperature range than conventional mineral oil-based gear oils. It meets the performance requirements of major gear drive manufacturers.
• Outstanding oxidation resistance and thermal stability at high temperatures
• Outstanding low-temperature properties
• High viscosity index and low pour point for use over wide temperatures
• Excellent extreme-pressure properties
• Protection against scuffing and wear
• Protects against rust, corrosion, and foaming
• Non-chlorinated additive system
• Suitable for year-round use
• Extended service intervals compared to mineral oil-based gear oils
• Heavily loaded enclosed gear drives, such as those found in mine hoists and mining machinery
• Enclosed industrial gear drives operating at very low or very high temperatures, or operating continuously at higher than normal operating temperatures
• Heavily loaded plain and rolling-element bearings operating at extreme temperatures
• Applications where the equipment manufacturer recommends a high VI, synthetic, extreme-pressure gear oil
Syncon EP Plus Gear Oil meets the requirements of the following industry and OEM specifications:
• ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
• DIN 51517 Part 3, Lubricating Oils, Type CLP HC
• German Steel Industry SEB 181226, Type CLP HC
• ISO 12925-1:1996, Type L-CKC
• Joy Machinery Specification TO-SHEP (ISO VG 320), TO-SMEP (ISO VG 220)
• U.S. Steel 224
| ISO Grade | 150 |
| AGMA Grade (obsolete) | 4 EP |
| Specific Gravity @ 60°F | 0.861 |
| AGMA Classification | AS |
| Density, lbs/gal @ 60°F | 7.17 |
| Color, ASTM D1500 | 1 |
| Flash Point (COC), °C (°F) | 249 (480) |
| Pour Point, °C (°F) | -49 (-56) |
| Viscosity | |
| cSt @ 40°C | 150 |
| cSt @ 100°C | 20.9 |
| SUS @ 100°F | 769 |
| SUS @ 210°F | 105 |
| Viscosity Index | 163 |
| Acid Number, ASTM D974, mg KOH/g | 0.76 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Four-Ball EP, ASTM D2783, Weld Load, kgf | 315 |
| Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm | 0.45 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | >12 |
| Oxidation Stability, ASTM D2893B | |
| Viscosity Increase @ 121°C, % | <6 |
Syncon EP Plus Gear Oil meets the requirements of the following industry and OEM specifications:
• ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
• DIN 51517 Part 3, Lubricating Oils, Type CLP HC
• German Steel Industry SEB 181226, Type CLP HC
• ISO 12925-1:1996, Type L-CKC
• Joy Machinery Specification TO-SHEP (ISO VG 320), TO-SMEP (ISO VG 220)
• U.S. Steel 224
| ISO Grade | 220 |
| AGMA Grade (obsolete) | 5 EP |
| Specific Gravity @ 60°F | 0.865 |
| AGMA Classification | AS |
| Density, lbs/gal @ 60°F | 7.2 |
| Color, ASTM D1500 | 1 |
| Flash Point (COC), °C (°F) | 249 (480) |
| Pour Point, °C (°F) | -49 (-56) |
| Viscosity | |
| cSt @ 40°C | 220 |
| cSt @ 100°C | 27.5 |
| SUS @ 100°F | 1134 |
| SUS @ 210°F | 135 |
| Viscosity Index | 161 |
| Acid Number, ASTM D974, mg KOH/g | 0.76 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Four-Ball EP, ASTM D2783, Weld Load, kgf | 315 |
| Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm | 0.45 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | >12 |
| Oxidation Stability, ASTM D2893B | |
| Viscosity Increase @ 121°C, % | <6 |
Syncon EP Plus Gear Oil meets the requirements of the following industry and OEM specifications:
• ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
• DIN 51517 Part 3, Lubricating Oils, Type CLP HC
• German Steel Industry SEB 181226, Type CLP HC
• ISO 12925-1:1996, Type L-CKC
• Joy Machinery Specification TO-SHEP (ISO VG 320), TO-SMEP (ISO VG 220)
• U.S. Steel 224
| ISO Grade | 320 |
| AGMA Grade (obsolete) | 6 EP |
| Specific Gravity @ 60°F | 0.866 |
| AGMA Classification | AS |
| Density, lbs/gal @ 60°F | 7.21 |
| Color, ASTM D1500 | 1 |
| Flash Point (COC), °C (°F) | 249 (480) |
| Pour Point, °C (°F) | -44 (-47) |
| Viscosity | |
| cSt @ 40°C | 320 |
| cSt @ 100°C | 35.3 |
| SUS @ 100°F | 1660 |
| SUS @ 210°F | 170 |
| Viscosity Index | 156 |
| Acid Number, ASTM D974, mg KOH/g | 0.76 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Four-Ball EP, ASTM D2783, Weld Load, kgf | 315 |
| Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm | 0.45 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | >12 |
| Oxidation Stability, ASTM D2893B | |
| Viscosity Increase @ 121°C, % | <8 |
Syncon EP Plus Gear Oil meets the requirements of the following industry and OEM specifications:
• ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
• DIN 51517 Part 3, Lubricating Oils, Type CLP HC
• German Steel Industry SEB 181226, Type CLP HC
• ISO 12925-1:1996, Type L-CKC
• Joy Machinery Specification TO-SHEP (ISO VG 320), TO-SMEP (ISO VG 220)
• U.S. Steel 224
| ISO Grade | 460 |
| AGMA Grade (obsolete) | 7 EP |
| Specific Gravity @ 60°F | 0.87 |
| AGMA Classification | AS |
| Density, lbs/gal @ 60°F | 7.24 |
| Color, ASTM D1500 | 1 |
| Flash Point (COC), °C (°F) | 249 (480) |
| Pour Point, °C (°F) | -47 (-53) |
| Viscosity | |
| cSt @ 40°C | 460 |
| cSt @ 100°C | 47.6 |
| SUS @ 100°F | 2392 |
| SUS @ 210°F | 230 |
| Viscosity Index | 162 |
| Acid Number, ASTM D974, mg KOH/g | 0.76 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Four-Ball EP, ASTM D2783, Weld Load, kgf | 315 |
| Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm | 0.45 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | >12 |
| Oxidation Stability, ASTM D2893B | |
| Viscosity Increase @ 121°C, % | <10 |
Syncon EP Plus Gear Oil meets the requirements of the following industry and OEM specifications:
• ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
• DIN 51517 Part 3, Lubricating Oils, Type CLP HC
• German Steel Industry SEB 181226, Type CLP HC
• ISO 12925-1:1996, Type L-CKC
• Joy Machinery Specification TO-SHEP (ISO VG 320), TO-SMEP (ISO VG 220)
• U.S. Steel 224
| ISO Grade | 680 |
| AGMA Grade (obsolete) | 8 EP |
| Specific Gravity @ 60°F | 0.875 |
| AGMA Classification | AS |
| Density, lbs/gal @ 60°F | 7.29 |
| Color, ASTM D1500 | 1 |
| Flash Point (COC), °C (°F) | 249 (480) |
| Pour Point, °C (°F) | -42 (-44) |
| Viscosity | |
| cSt @ 40°C | 680 |
| cSt @ 100°C | 64.4 |
| SUS @ 100°F | 3549 |
| SUS @ 210°F | 311 |
| Viscosity Index | 166 |
| Acid Number, ASTM D974, mg KOH/g | 0.76 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Four-Ball EP, ASTM D2783, Weld Load, kgf | 315 |
| Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm | 0.45 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | >12 |
| Oxidation Stability, ASTM D2893B | |
| Viscosity Increase @ 121°C, % | <10 |
