Phillips 66® Omniguard XD5 is a premium quality, high performance, extreme pressure (EP) calcium sulfonate grease developed to satisfy the severe lubrication requirements of mining and off-road equipment manufactured by Caterpillar, Terex, Komatsu Dresser, Le Tourneau, P&H, and others. It is recommended for use in AC and DC electric drive haul trucks, cranes, scrapers, shovels, drag lines and other equipment operating under wet conditions, moderate to high temperatures and heavy or shock loads.
Omniguard XD5 is manufactured with high-quality base oils and a non-soap, calcium sulfonate thickener. It is compounded with select additives that provide EP and antiwear properties, excellent rust and corrosion protection, and excellent oxidation resistance. It is fortified with 5% molybdenum disulfide (moly) for extra wear protection under heavy or shock loads. Functional polymers provide better adhesion to metal surfaces and enhanced resistance to water washout in wet environments.
N/A
NLGI Grade | 1 |
Thickener Type | Calcium Sulfonate |
Color | Gray |
Texture | Smooth |
Density, lbs/gal | 9.17 |
Molybdenum Disulfide, wt% | 5 |
Dropping Point, °C (°F), ASTM D2265 | 275 (527) |
Viscosity, Kinematic, ASTM D445 | |
cSt @ 40°C | 150 |
cSt @ 100°C | 14.8 |
Penetration, ASTM D217, Worked (60 strokes) | 310-340 |
Oxidation Stability, ASTM D942, 100 Hours, psi (kPa) | 1 (6.9) |
Four-Ball EP, ASTM D2596, Weld Load, Kgf | 800 |
Four-Ball Wear Scar, ASTM D2266, mm | 0.51 |
Timken OK Load, ASTM D2509, lbs | 60 |
Corrosion Prevention, ASTM D1743 | Pass |
Copper Corrosion, ASTM D4048 | 1b |
N/A
NLGI Grade | 2 |
Thickener Type | Calcium Sulfonate |
Color | Gray |
Texture | Smooth |
Density, lbs/gal | 9.17 |
Molybdenum Disulfide, wt% | 5 |
Dropping Point, °C (°F), ASTM D2265 | 275 (527) |
Viscosity, Kinematic, ASTM D445 | |
cSt @ 100°C | 14.8 |
cSt @ 40°C | 150 |
Penetration, Worked (60 strokes), ASTM D217 | 265-295 |
Oxidation Stability, 100 Hours, psi (kPa), ASTM D942 | 1 (6.9) |
Four-Ball Wear Scar, mm, ASTM D2266 | 0.59 |
Four-Ball EP, Weld Load, Kgf, ASTM D2596 | 800 |
Timken OK Load, lbs, ASTM D2509 | 60 |
Corrosion Prevention, ASTM D1743 | Pass |
Copper Corrosion, ASTM D4048 | 1b |