Phillips 66® Multipurpose R&O Oil is a rust and oxidation (R&O)-inhibited, antiwear circulating oil developed for use in circulation systems, centrifugal air compressors, geared turbines, lightly loaded enclosed gear drives and many other industrial applications. It contains a low level of ashless (zinc-free) antiwear additive for mild wear protection.
• Good oxidation resistance to minimize sludge and varnish formation
• Mild wear protection
• Protects against rust and corrosion
• Excellent water-separating properties
• Low carbon-forming tendency for use in centrifugal air compressors
• Good foam resistance
• Air tools and other pneumatic equipment lubricated through air line lubricators
• Centrifugal air compressors
• Steam turbines and hydroelectric turbines, both direct-drive and with gear drives
• Lightly loaded enclosed industrial gear drives where the OEM specifies a R&O type oil (ISO VG 68 and higher, typically)
• Lightly loaded plain and rolling-element bearings, such as those in electric motors and blowers
• Vacuum pumps, deep-well water pumps and machine tools
• General-purpose machinery and shop lubrication
Multipurpose R&O Oil meets the requirements of the following industry and OEM specifications:
• ABB G12106
• AGMA Grades 0 through 7 (non-EP)
• Alstom Power HTGD 90 117 for geared turbines
• ASTM D4304 Type I Turbine Oil (ISO VG 32, 46, 68, 100)
• British Standard 489
• Denison Hydraulics HF-1
• DIN 51517 Part 2, Lubricating Oils, Type CL
• DIN 51524 Part 1, Hydraulic Oils, Type HL
• General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143A (obsolete)
• Ingersoll-Rand Centak centrifugal compressors
• Solar Turbines ES 9-224 Class II Turbine Oil
• U.S. Military MIL-L-17672D
• U.S. Steel 126
| ISO Grade | 22 |
| AGMA Grade | |
| Specific Gravity @ 60°F | 0.856 |
| Density, lbs/gal @ 60°F | 7.13 |
| Color, ASTM 1500 | 0.5 |
| Flash Point (COC), °C (°F) | 210 (410) |
| Pour Point, °C (°F) | -40 (-40) |
| Viscosity | |
| cSt @ 40°C | 22 |
| cSt @ 100°C | 4.3 |
| SUS @ 100°F | 115 |
| SUS @ 210°F | 40.7 |
| Viscosity Index | 101 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172 | |
| Scar Diameter, mm | |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | |
| RPVOT, ASTM D2272, minutes | |
| Rust Test, ASTM D665 A&B | Pass |
Multipurpose R&O Oil meets the requirements of the following industry and OEM specifications:
• ABB G12106
• AGMA Grades 0 through 7 (non-EP)
• Alstom Power HTGD 90 117 for geared turbines
• ASTM D4304 Type I Turbine Oil (ISO VG 32, 46, 68, 100)
• British Standard 489
• Denison Hydraulics HF-1
• DIN 51517 Part 2, Lubricating Oils, Type CL
• DIN 51524 Part 1, Hydraulic Oils, Type HL
• General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143A (obsolete)
• Ingersoll-Rand Centak centrifugal compressors
• Solar Turbines ES 9-224 Class II Turbine Oil
• U.S. Military MIL-L-17672D
• U.S. Steel 126
| ISO Grade | 32 |
| AGMA Grade | 0 |
| Specific Gravity @ 60°F | 0.862 |
| Density, lbs/gal @ 60°F | 7.18 |
| Color, ASTM 1500 | 0.5 |
| Flash Point (COC), °C (°F) | 232 (450) |
| Pour Point, °C (°F) | -40 (-40) |
| Viscosity | |
| cSt @ 40°C | 32.5 |
| cSt @ 100°C | 5.4 |
| SUS @ 100°F | 168 |
| SUS @ 210°F | 44.4 |
| Viscosity Index | 99 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172 | |
| Scar Diameter, mm | 0.54 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 10 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | 4500 |
| RPVOT, ASTM D2272, minutes | 750 |
| Rust Test, ASTM D665 A&B | Pass |
Multipurpose R&O Oil meets the requirements of the following industry and OEM specifications:
• ABB G12106
• AGMA Grades 0 through 7 (non-EP)
• Alstom Power HTGD 90 117 for geared turbines
• ASTM D4304 Type I Turbine Oil (ISO VG 32, 46, 68, 100)
• British Standard 489
• Denison Hydraulics HF-1
• DIN 51517 Part 2, Lubricating Oils, Type CL
• DIN 51524 Part 1, Hydraulic Oils, Type HL
• General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143A (obsolete)
• Ingersoll-Rand Centak centrifugal compressors
• Solar Turbines ES 9-224 Class II Turbine Oil
• U.S. Military MIL-L-17672D
• U.S. Steel 126
| ISO Grade | 46 |
| AGMA Grade | 1 |
| Specific Gravity @ 60°F | 0.868 |
| Density, lbs/gal @ 60°F | 7.23 |
| Color, ASTM 1500 | 0.5 |
| Flash Point (COC), °C (°F) | 238 (460) |
| Pour Point, °C (°F) | -40 (-40) |
| Viscosity | |
| cSt @ 40°C | 45 |
| cSt @ 100°C | 6.7 |
| SUS @ 100°F | 232 |
| SUS @ 210°F | 48.7 |
| Viscosity Index | 101 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172 | |
| Scar Diameter, mm | 0.48 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 10 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | 4500 |
| RPVOT, ASTM D2272, minutes | 750 |
| Rust Test, ASTM D665 A&B | Pass |
Multipurpose R&O Oil meets the requirements of the following industry and OEM specifications:
• ABB G12106
• AGMA Grades 0 through 7 (non-EP)
• Alstom Power HTGD 90 117 for geared turbines
• ASTM D4304 Type I Turbine Oil (ISO VG 32, 46, 68, 100)
• British Standard 489
• Denison Hydraulics HF-1
• DIN 51517 Part 2, Lubricating Oils, Type CL
• DIN 51524 Part 1, Hydraulic Oils, Type HL
• General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143A (obsolete)
• Ingersoll-Rand Centak centrifugal compressors
• Solar Turbines ES 9-224 Class II Turbine Oil
• U.S. Military MIL-L-17672D
• U.S. Steel 126
| ISO Grade | 68 |
| AGMA Grade | 2 |
| Specific Gravity @ 60°F | 0.873 |
| Density, lbs/gal @ 60°F | 7.27 |
| Color, ASTM 1500 | 0.5 |
| Flash Point (COC), °C (°F) | 243 (469) |
| Pour Point, °C (°F) | -34 (-29) |
| Viscosity | |
| cSt @ 40°C | 68 |
| cSt @ 100°C | 8.8 |
| SUS @ 100°F | 352 |
| SUS @ 210°F | 55.9 |
| Viscosity Index | 102 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172 | |
| Scar Diameter, mm | 0.45 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 10 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | 4500 |
| RPVOT, ASTM D2272, minutes | 700 |
| Rust Test, ASTM D665 A&B | Pass |
Multipurpose R&O Oil meets the requirements of the following industry and OEM specifications:
• ABB G12106
• AGMA Grades 0 through 7 (non-EP)
• Alstom Power HTGD 90 117 for geared turbines
• ASTM D4304 Type I Turbine Oil (ISO VG 32, 46, 68, 100)
• British Standard 489
• Denison Hydraulics HF-1
• DIN 51517 Part 2, Lubricating Oils, Type CL
• DIN 51524 Part 1, Hydraulic Oils, Type HL
• General Electric GEK 101941A, GEK 46506e, GEK 27070 (obsolete), GEK 28143A (obsolete)
• Ingersoll-Rand Centak centrifugal compressors
• Solar Turbines ES 9-224 Class II Turbine Oil
• U.S. Military MIL-L-17672D
• U.S. Steel 126
| ISO Grade | 100 |
| AGMA Grade | 3 |
| Specific Gravity @ 60°F | 0.877 |
| Density, lbs/gal @ 60°F | 7.3 |
| Color, ASTM 1500 | 0.5 |
| Flash Point (COC), °C (°F) | 268 (514) |
| Pour Point, °C (°F) | -34 (-29) |
| Viscosity | |
| cSt @ 40°C | 101 |
| cSt @ 100°C | 11.3 |
| SUS @ 100°F | 527 |
| SUS @ 210°F | 65 |
| Viscosity Index | 98 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172 | |
| Scar Diameter, mm | 0.45 |
| FZG Scuffing Test, ASTM D5182 | |
| Failure Load Stage | 10 |
| Oxidation Stability | |
| TOST, ASTM D943-04a, hours | 4500 |
| RPVOT, ASTM D2272, minutes | 700 |
| Rust Test, ASTM D665 A&B | Pass |
| ISO Grade | 150 |
| AGMA Grade (obsolete) | 4 |
| AGMA Classification | R&O |
| Specific Gravity @ 60°F | 0.866 |
| Density, lbs/gal @ 60°F | 7.21 |
| Color, ASTM D1500 | 1 |
| Flash Point (COC), °C (°F) | 243 (469) |
| Pour Point, °C (°F) | -44 (-47) |
| Viscosity | |
| cSt @ 40°C | 149 |
| cSt @ 100°C | 19.8 |
| SUS @ 100°F | 766 |
| SUS @ 210°F | 99.9 |
| Viscosity Index | 153 |
| Acid Number, ASTM D974, mg KOH/g | 1.5 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 15 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm | 0.4 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 12 |
| ISO Grade | 220 |
| AGMA Grade (obsolete) | 5 |
| AGMA Classification | R&O |
| Specific Gravity @ 60°F | 0.871 |
| Density, lbs/gal @ 60°F | 7.25 |
| Color, ASTM D1500 | 1 |
| Flash Point (COC), °C (°F) | 266 (511) |
| Pour Point, °C (°F) | -45 (-49) |
| Viscosity | |
| cSt @ 40°C | 231 |
| cSt @ 100°C | 27.6 |
| SUS @ 100°F | 1194 |
| SUS @ 210°F | 135 |
| Viscosity Index | 155 |
| Acid Number, ASTM D974, mg KOH/g | 1.5 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm | 0.4 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 12 |
| ISO Grade | 320 |
| AGMA Grade (obsolete) | 6 |
| AGMA Classification | R&O |
| Specific Gravity @ 60°F | 0.875 |
| Density, lbs/gal @ 60°F | 7.29 |
| Color, ASTM D1500 | 1 |
| Flash Point (COC), °C (°F) | 255 (491) |
| Pour Point, °C (°F) | -48 (-54) |
| Viscosity | |
| cSt @ 40°C | 341 |
| cSt @ 100°C | 37.2 |
| SUS @ 100°F | 1769 |
| SUS @ 210°F | 180 |
| Viscosity Index | 157 |
| Acid Number, ASTM D974, mg KOH/g | 1.5 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 20 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm | 0.4 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 12 |
| ISO Grade | 460 |
| AGMA Grade (obsolete) | 7 |
| AGMA Classification | R&O |
| Specific Gravity @ 60°F | 0.882 |
| Density, lbs/gal @ 60°F | 7.34 |
| Color, ASTM D1500 | 1 |
| Flash Point (COC), °C (°F) | 243 (469) |
| Pour Point, °C (°F) | -48 (-54) |
| Viscosity | |
| cSt @ 40°C | 480 |
| cSt @ 100°C | 48.3 |
| SUS @ 100°F | 2500 |
| SUS @ 210°F | 233 |
| Viscosity Index | 159 |
| Acid Number, ASTM D974, mg KOH/g | 1.5 |
| Copper Corrosion, ASTM D130, 48 hrs @ 80°C | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 25 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear Test, ASTM D4172, Scar Diameter, mm | 0.4 |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 12 |
