Phillips 66® Multiplex 600 is a high quality, multipurpose, extreme pressure (EP) lithium complex grease developed for the lubrication of automotive and industrial equipment operating under heavy loads and at moderate to high temperatures. It is recommended for use in a variety of automotive, agricultural, construction, mining, and industrial applications. It is NLGI GC-LB certified for use as a multipurpose automotive wheel bearing and chassis lubricant.
Multiplex 600 is manufactured with high-quality base oils, a special polymer, and a lithium complex soap thickener. It is fortified with EP and antiwear additives plus rust and oxidation inhibitors. It has excellent thermal stability at high temperatures, high load carrying capacity for excellent wear protection, and protects metal parts against rust and corrosion. Its tackiness properties and heavy base oil provide a high level of adhesion to bearing surfaces maintaining an effective seal to help minimize bearing contamination, improve retention, reduce leakage and provide excellent resistance to water washout.
N/A
NLGI Grade | 1 |
Thickener Type | Lithium Complex |
Color | Red |
Texture | Smooth/Tacky |
Density, lbs/gal | 7.82 |
Dropping Point, °C (°F), ASTM D2265 | >260 (>500) |
Viscosity, Kinematic, ASTM D445 | |
cSt @ 40°C | 630 |
cSt @ 100°C | 44 |
Penetration, Worked (60 strokes), ASTM D217 | 310-340 |
Oxidation Stability, 100 Hours, psi (kPa), ASTM D942 | 2 (13.8) |
Four-Ball Wear Scar, mm, ASTM D2266 | 0.48 |
Four-Ball EP, Weld Load, Kgf, ASTM D2596 | 500 |
Timken OK Load, lbs, ASTM D2509 | 80 |
Corrosion Prevention, ASTM D1743 | Pass |
Copper Corrosion, ASTM D4048 | 1a |
Water Wash-out, wt%, ASTM D1264 | 5 |
N/A
NLGI Grade | 2 |
Thickener Type | Lithium Complex |
Color | Red |
Texture | Smooth/Tacky |
Density, lbs/gal | 7.83 |
Dropping Point, °C (°F), ASTM D2265 | >260 (>500) |
Viscosity, Kinematic, ASTM D445 | |
cSt @ 40°C | 630 |
cSt @ 100°C | 44 |
Penetration, Worked (60 strokes), ASTM D217 | 265-295 |
Oxidation Stability, 100 Hours, psi (kPa), ASTM D942 | 2 (13.8) |
Four-Ball Wear Scar, mm, ASTM D2266 | 0.59 |
Four-Ball EP, Weld Load, Kgf, ASTM D2596 | 500 |
Timken OK Load, lbs, ASTM D2509 | 80 |
Corrosion Prevention, ASTM D1743 | Pass |
Copper Corrosion, ASTM D4048 | 1a |
Water Wash-out, wt%, ASTM D1264 | 5 |