Phillips 66® Multiplex 460 is a premium quality, adhesive, extreme pressure (EP), lithium complex grease specially developed for use in demanding industrial applications such as steel rolling mills where high loads, high temperatures and/or wet conditions exist.
Multiplex 460 is manufactured with high quality, high viscosity base oils, and a lithium complex soap thickener. It is a tacky grease designed to stay in place and is fortified with EP and antiwear additives as well as rust and oxidation inhibitors. It has excellent oxidation resistance for long service life, high load carrying capacity for excellent wear protection, and protects metal parts against rust and corrosion. It has excellent adhesion to bearing surfaces for improved retention and resistance to water and has excellent resistance to structural breakdown even under severe operating conditions.
N/A
NLGI Grade | 1 |
Thickener Type | Lithium Complex |
Color | Green |
Texture | Smooth/Tacky |
Density, lbs/gal | 7.73 |
Dropping Point, °C (°F), ASTM D2265 | >260 (>500) |
Viscosity, Kinematic, ASTM D445 | |
cSt @ 40°C | 415 |
cSt @ 100°C | 26.8 |
Penetration, Worked (60 strokes), ASTM D217 | 310-340 |
Oxidation Stability, 100 Hours, psi (kPa), ASTM D942 | 3 (20.7) |
Four-Ball Wear Scar, mm, ASTM D2266 | 0.44 |
Four-Ball EP, Weld Load, Kgf, ASTM D2596 | 500 |
Timken OK Load, lbs, ASTM D2509 | 55 |
Corrosion Prevention, ASTM D1743 | Pass |
Copper Corrosion, ASTM D4048 | 1b |
Water Spray-off, wt%, ASTM D4049 | 28 |
N/A
NLGI Grade | 2 |
Thickener Type | Lithium Complex |
Color | Green |
Texture | Smooth/Tacky |
Density, lbs/gal | 7.73 |
Dropping Point, °C (°F), ASTM D2265 | >260 (>500) |
Viscosity, Kinematic, ASTM D445 | |
cSt @ 40°C | 415 |
cSt @ 100°C | 26.8 |
Penetration, Worked (60 strokes), ASTM D217 | 265-295 |
Oxidation Stability, 100 Hours, psi (kPa), ASTM D942 | 3 (20.7) |
Four-Ball Wear Scar, mm, ASTM D2266 | 0.44 |
Four-Ball EP, Weld Load, Kgf, ASTM D2596 | 500 |
Timken OK Load, lbs, ASTM D2509 | 55 |
Corrosion Prevention, ASTM D1743 | Pass |
Copper Corrosion, ASTM D4048 | 1b |
Water Spray-off, wt%, ASTM D4049 | 6.5 |