Extra Duty Gear Oil

# LBPH815913

Premium Extreme-Pressure Industrial Gear Oil; Formulated with “Clean Gear” Additive Technology

Phillips 66® Extra Duty Gear Oil is a premium quality, heavy-duty, extreme pressure (EP) industrial gear oil developed for the lubrication of heavily loaded enclosed gear drives operating under moderate to severe service conditions. It is specially formulated with “clean gear” additive technology to minimize deposit formation and provide excellent gearbox cleanliness. It is recommended for use in all applications where the equipment manufacturer specifies an AGMA EP gear oil.

Features & Benefits

  • High load-carrying capacity for protection against scuffing and wear
  • Excellent oxidation resistance and thermal stability
  • Excellent deposit control for gearbox cleanliness
  • Protects against rust and corrosion
  • Fast water separation
  • Quick foam release
  • Effective mist suppression (“M” grades)

Applications

• Enclosed industrial gear drives operating under heavy loads, high peak loads or intermittent shock loads

• Enclosed spur, bevel, helical, herringbone and planetary gear drives where the equipment manufacturer specifies an AGMA EP gear oil

• Heavily loaded plain and rolling-element bearings

Licenses & Approvals

Extra Duty Gear Oil meets the requirements of the following industry specifications:

  • ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
  • DIN 51517 Part 3, Lubricating Oils, Type CLP
  • Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)
  • German Steel Industry SEB 181226, Type CLP
  • ISO 12925-1, Type L-CKC
  • U.S. Steel 224

Additional Details

ISO Grade 68
AGMA Grade 2 EP
Specific Gravity @ 60°F 0.876
Density, lbs/gal @ 60°F 7.29
Color, ASTM D1500 3
Flash Point (COC), °C (°F) 235 (455)
Pour Point, °C (°F) -33 (-27)
Viscosity
cSt @ 40°C 68
cSt @ 100°C 8.7
SUS @ 100°F 353
SUS @ 210°F 55.5
Viscosity Index 99
Acid Number, ASTM D974, mg KOH/g 0.73
Copper Corrosion, ASTM D130 1a
Foam Test, ASTM D892, Seq. I, mL 0/0
Four-Ball EP, ASTM D2783, Weld Load, kgf
Four-Ball Wear, ASTM D4172
Scar Diameter, mm 0.3
FZG Scuffing Test, ASTM D5182
Failure Load Stage 12
Timken OK Load, ASTM D2782, lb
Licenses & Approvals

Extra Duty Gear Oil meets the requirements of the following industry specifications:

  • ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
  • DIN 51517 Part 3, Lubricating Oils, Type CLP
  • Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)
  • German Steel Industry SEB 181226, Type CLP
  • ISO 12925-1, Type L-CKC
  • U.S. Steel 224

Additional Details

ISO Grade 100
AGMA Grade 3 EP
Specific Gravity @ 60°F 0.88
Density, lbs/gal @ 60°F 7.33
Color, ASTM D1500 3.5
Flash Point (COC), °C (°F) 235 (455)
Pour Point, °C (°F) -33 (-27)
Viscosity
cSt @ 40°C 100
cSt @ 100°C 11.3
SUS @ 100°F 522
SUS @ 210°F 65
Viscosity Index 99
Acid Number, ASTM D974, mg KOH/g 0.73
Copper Corrosion, ASTM D130 1a
Foam Test, ASTM D892, Seq. I, mL 0/0
Four-Ball EP, ASTM D2783, Weld Load, kgf
Four-Ball Wear, ASTM D4172
Scar Diameter, mm 0.3
FZG Scuffing Test, ASTM D5182
Failure Load Stage 12
Timken OK Load, ASTM D2782, lb
Licenses & Approvals

Extra Duty Gear Oil meets the requirements of the following industry specifications:

  • ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
  • DIN 51517 Part 3, Lubricating Oils, Type CLP
  • Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)
  • German Steel Industry SEB 181226, Type CLP
  • ISO 12925-1, Type L-CKC
  • U.S. Steel 224

Additional Details

ISO Grade 150
AGMA Grade 4 EP
Specific Gravity @ 60°F 0.884
Density, lbs/gal @ 60°F 7.36
Color, ASTM D1500 4
Flash Point (COC), °C (°F) 243 (469)
Pour Point, °C (°F) -33 (-27)
Viscosity
cSt @ 40°C 150
cSt @ 100°C 14.4
SUS @ 100°F 789
SUS @ 210°F 77.3
Viscosity Index 93
Acid Number, ASTM D974, mg KOH/g 0.73
Copper Corrosion, ASTM D130 1a
Foam Test, ASTM D892, Seq. I, mL 0/0
Four-Ball EP, ASTM D2783, Weld Load, kgf 250
Four-Ball Wear, ASTM D4172
Scar Diameter, mm 0.3
FZG Scuffing Test, ASTM D5182
Failure Load Stage >12
Timken OK Load, ASTM D2782, lb 60
Licenses & Approvals

Extra Duty Gear Oil meets the requirements of the following industry specifications:

  • ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
  • DIN 51517 Part 3, Lubricating Oils, Type CLP
  • Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)
  • German Steel Industry SEB 181226, Type CLP
  • ISO 12925-1, Type L-CKC
  • U.S. Steel 224

Additional Details

ISO Grade 220
AGMA Grade 5 EP
Specific Gravity @ 60°F 0.888
Density, lbs/gal @ 60°F 7.4
Color, ASTM D1500 4.5
Flash Point (COC), °C (°F) 252 (486)
Pour Point, °C (°F) -27 (-17)
Viscosity
cSt @ 40°C 220
cSt @ 100°C 18.4
SUS @ 100°F 1166
SUS @ 210°F 94.2
Viscosity Index 92
Acid Number, ASTM D974, mg KOH/g 0.73
Copper Corrosion, ASTM D130 1a
Foam Test, ASTM D892, Seq. I, mL 0/0
Four-Ball EP, ASTM D2783, Weld Load, kgf 250
Four-Ball Wear, ASTM D4172
Scar Diameter, mm 0.3
FZG Scuffing Test, ASTM D5182
Failure Load Stage >12
Timken OK Load, ASTM D2782, lb 60
Licenses & Approvals

Extra Duty Gear Oil meets the requirements of the following industry specifications:

  • ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
  • DIN 51517 Part 3, Lubricating Oils, Type CLP
  • Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)
  • German Steel Industry SEB 181226, Type CLP
  • ISO 12925-1, Type L-CKC
  • U.S. Steel 224

Additional Details

ISO Grade 220M
AGMA Grade 5 EP
Specific Gravity @ 60°F 0.888
Density, lbs/gal @ 60°F 7.39
Color, ASTM D1500 4
Flash Point (COC), °C (°F) 243 (469)
Pour Point, °C (°F) -21(-6)
Viscosity
cSt @ 40°C 220
cSt @ 100°C 19
SUS @ 100°F 1163
SUS @ 210°F 97
Viscosity Index 97
Acid Number, ASTM D974, mg KOH/g 0.73
Copper Corrosion, ASTM D130 1a
Foam Test, ASTM D892, Seq. I, mL 0/0
Four-Ball EP, ASTM D2783, Weld Load, kgf 250
Four-Ball Wear, ASTM D4172
Scar Diameter, mm 0.3
FZG Scuffing Test, ASTM D5182
Failure Load Stage >12
Timken OK Load, ASTM D2782, lb 60
Licenses & Approvals

Extra Duty Gear Oil meets the requirements of the following industry specifications:

  • ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
  • DIN 51517 Part 3, Lubricating Oils, Type CLP
  • Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)
  • German Steel Industry SEB 181226, Type CLP
  • ISO 12925-1, Type L-CKC
  • U.S. Steel 224

Additional Details

ISO Grade 320
AGMA Grade 6 EP
Specific Gravity @ 60°F 0.892
Density, lbs/gal @ 60°F 7.42
Color, ASTM D1500 5
Flash Point (COC), °C (°F) 254 (489)
Pour Point, °C (°F) -18 (0)
Viscosity
cSt @ 40°C 320
cSt @ 100°C 23.7
SUS @ 100°F 1706
SUS @ 210°F 118
Viscosity Index 94
Acid Number, ASTM D974, mg KOH/g 0.73
Copper Corrosion, ASTM D130 1a
Foam Test, ASTM D892, Seq. I, mL 0/0
Four-Ball EP, ASTM D2783, Weld Load, kgf 250
Four-Ball Wear, ASTM D4172
Scar Diameter, mm 0.3
FZG Scuffing Test, ASTM D5182
Failure Load Stage >12
Timken OK Load, ASTM D2782, lb 60
Licenses & Approvals

Extra Duty Gear Oil meets the requirements of the following industry specifications:

  • ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
  • DIN 51517 Part 3, Lubricating Oils, Type CLP
  • Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)
  • German Steel Industry SEB 181226, Type CLP
  • ISO 12925-1, Type L-CKC
  • U.S. Steel 224

Additional Details

ISO Grade 460
AGMA Grade 7 EP
Specific Gravity @ 60°F 0.895
Density, lbs/gal @ 60°F 7.46
Color, ASTM D1500 5.5
Flash Point (COC), °C (°F) 254 (489)
Pour Point, °C (°F) -18 (0)
Viscosity
cSt @ 40°C 460
cSt @ 100°C 30.5
SUS @ 100°F 2466
SUS @ 210°F 150
Viscosity Index 96
Acid Number, ASTM D974, mg KOH/g 0.73
Copper Corrosion, ASTM D130 1a
Foam Test, ASTM D892, Seq. I, mL 0/0
Four-Ball EP, ASTM D2783, Weld Load, kgf 250
Four-Ball Wear, ASTM D4172
Scar Diameter, mm 0.38
FZG Scuffing Test, ASTM D5182
Failure Load Stage >12
Timken OK Load, ASTM D2782, lb 60
Licenses & Approvals

Extra Duty Gear Oil meets the requirements of the following industry specifications:

  • ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
  • DIN 51517 Part 3, Lubricating Oils, Type CLP
  • Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)
  • German Steel Industry SEB 181226, Type CLP
  • ISO 12925-1, Type L-CKC
  • U.S. Steel 224

Additional Details

ISO Grade 460M
AGMA Grade 7 EP
Specific Gravity @ 60°F 0.894
Density, lbs/gal @ 60°F 7.44
Color, ASTM D1500 5.5
Flash Point (COC), °C (°F) 246 (276)
Pour Point, °C (°F) -15 (5)
Viscosity
cSt @ 40°C 460
cSt @ 100°C 30.4
SUS @ 100°F 2466
SUS @ 210°F 149
Viscosity Index 95
Acid Number, ASTM D974, mg KOH/g 0.73
Copper Corrosion, ASTM D130 1a
Foam Test, ASTM D892, Seq. I, mL 0/0
Four-Ball EP, ASTM D2783, Weld Load, kgf 250
Four-Ball Wear, ASTM D4172
Scar Diameter, mm 0.38
FZG Scuffing Test, ASTM D5182
Failure Load Stage >12
Timken OK Load, ASTM D2782, lb 60
Licenses & Approvals

Extra Duty Gear Oil meets the requirements of the following industry specifications:

  • ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
  • DIN 51517 Part 3, Lubricating Oils, Type CLP
  • Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)
  • German Steel Industry SEB 181226, Type CLP
  • ISO 12925-1, Type L-CKC
  • U.S. Steel 224

Additional Details

ISO Grade 680
AGMA Grade 8 EP
Specific Gravity @ 60°F 0.91
Density, lbs/gal @ 60°F 7.57
Color, ASTM D1500 8
Flash Point (COC), °C (°F) >300 (>572)
Pour Point, °C (°F) -3 (27)
Viscosity
cSt @ 40°C 680
cSt @ 100°C 32.2
SUS @ 100°F 3725
SUS @ 210°F 158
Viscosity Index 70
Acid Number, ASTM D974, mg KOH/g 0.73
Copper Corrosion, ASTM D130 1b
Foam Test, ASTM D892, Seq. I, mL 10/0
Four-Ball EP, ASTM D2783, Weld Load, kgf 250
Four-Ball Wear, ASTM D4172
Scar Diameter, mm 0.38
FZG Scuffing Test, ASTM D5182
Failure Load Stage >12
Timken OK Load, ASTM D2782, lb 60
Licenses & Approvals

Extra Duty Gear Oil meets the requirements of the following industry specifications:

  • ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
  • DIN 51517 Part 3, Lubricating Oils, Type CLP
  • Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)
  • German Steel Industry SEB 181226, Type CLP
  • ISO 12925-1, Type L-CKC
  • U.S. Steel 224

Additional Details

ISO Grade 800
AGMA Grade
Specific Gravity @ 60°F 0.896
Density, lbs/gal @ 60°F 7.46
Color, ASTM D1500 6
Flash Point (COC), °C (°F) >300 (>572)
Pour Point, °C (°F) -12 (10)
Viscosity
cSt @ 40°C 800
cSt @ 100°C 50.1
SUS @ 100°F 4596
SUS @ 210°F 243
Viscosity Index 110
Acid Number, ASTM D974, mg KOH/g 0.73
Copper Corrosion, ASTM D130 1b
Foam Test, ASTM D892, Seq. I, mL 10/0
Four-Ball EP, ASTM D2783, Weld Load, kgf 250
Four-Ball Wear, ASTM D4172
Scar Diameter, mm 0.38
FZG Scuffing Test, ASTM D5182
Failure Load Stage >12
Timken OK Load, ASTM D2782, lb 60
Licenses & Approvals

Extra Duty Gear Oil meets the requirements of the following industry specifications:

  • ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils
  • DIN 51517 Part 3, Lubricating Oils, Type CLP
  • Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220), P-59 (ISO VG 320), P 35 (ISO VG 460) (approved)
  • German Steel Industry SEB 181226, Type CLP
  • ISO 12925-1, Type L-CKC
  • U.S. Steel 224

Additional Details

ISO Grade 1000
AGMA Grade 8A EP
Specific Gravity @ 60°F 0.924
Density, lbs/gal @ 60°F 7.69
Color, ASTM D1500 8
Flash Point (COC), °C (°F) >300 (>572)
Pour Point, °C (°F) 0 (32)
Viscosity
cSt @ 40°C 1000
cSt @ 100°C 39.5
SUS @ 100°F 5535
SUS @ 210°F 193
Viscosity Index 66
Acid Number, ASTM D974, mg KOH/g 0.73
Copper Corrosion, ASTM D130 1b
Foam Test, ASTM D892, Seq. I, mL 10/0
Four-Ball EP, ASTM D2783, Weld Load, kgf 250
Four-Ball Wear, ASTM D4172
Scar Diameter, mm 0.38
FZG Scuffing Test, ASTM D5182
Failure Load Stage >12
Timken OK Load, ASTM D2782, lb 60

Product Inquiry