Phillips 66® Diamond Class AW Turbine Oil is a premium quality, rust and oxidation (R&O)-inhibited, anti-wear turbine oil developed for use in geared and direct-drive gas turbines and steam turbines in severe service.
• Outstanding oxidation resistance and thermal stability for long service life
• Protects against sludge and varnish formation
• Excellent wear protection for gears and bearings
• Protects against rust and corrosion
• Excellent water-separating properties
• Resists the formation of emulsions and bacteria buildup
• Good foam resistance
• Meets ISO Cleanliness Code rating of 18/16/13 (1)
(1) Note: Applies only to bulk product as delivered from Phillips 66 manufacturing plants. Particle counts may vary from lab to lab.
• Combined-cycle and co-generation gas turbines
• Gas turbines and steam turbines with gear drives
Diamond Class AW Turbine Oil meets the requirements of the following industry and OEM specifications:
• ABB G12106
• Alstom Power HTGD 90 117, for turbines without gear drives
• ASTM D4304-06a, Type II Turbine Oil
• British Standard 489
• Cincinnati Machine P-38 (ISO VG 32)
• DIN 51515 Part 1, Lubricating Oils, Type L-TD
• DIN 51515 Part 2, Lubricating Oils, Type L-TG
• DIN 51517 Part 2, Lubricating Oils, Type CL
• DIN 51524 Part 1, Hydraulic Oils, Type HL
• Elliott ring-oiled turbines, where mineral-based turbine oil is specified
• General Electric GEK 101941a, GEK 107395a, GEK 32568j, GEK 46506e, GEK 27070 (obsolete), GEK 28143b (obsolete)
• ISO 8068, Type L-TGB, Type L-TGSB
• Siemens Power Generation TLV 9013 04 (approved), TLV 9013 05
• Siemens Westinghouse 21T0591 (obsolete), 55125Z3 (obsolete)
• U.S. Military MIL-PRF-17672D, Symbol 2075 T-H (ISO VG 32), 2110 T-H (ISO VG 46), 2135 T-H (ISO VG 68)
• U.S. Steel 126
| ISO Grade | 32 |
| Specific Gravity @ 60°F | 0.862 |
| Density, lbs/gal @ 60°F | 7.18 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 220 (428) |
| Pour Point, °C (°F) | -39 (-38) |
| Viscosity | |
| cSt @ 40°C | 32 |
| cSt @ 100°C | 5.4 |
| SUS @ 100°F | 165 |
| SUS @ 210°F | 44.4 |
| Viscosity Index | 102 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Air Release, ASTM D3427, minutes | 2.2 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 15 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172, Scar Diameter, mm | 0.5 |
| Oxidation Stability | |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 10 |
| TOST, ASTM D943-04a, hours | >24,000 |
| RPVOT, ASTM D2272, minutes | >1,700 |
| Rust Test, ASTM D665 A&B | Pass |
| Cleanliness Code, ISO 4406:1999 | 18/16/13 |
Diamond Class AW Turbine Oil meets the requirements of the following industry and OEM specifications:
• ABB G12106
• Alstom Power HTGD 90 117, for turbines without gear drives
• ASTM D4304-06a, Type II Turbine Oil
• British Standard 489
• Cincinnati Machine P-38 (ISO VG 32)
• DIN 51515 Part 1, Lubricating Oils, Type L-TD
• DIN 51515 Part 2, Lubricating Oils, Type L-TG
• DIN 51517 Part 2, Lubricating Oils, Type CL
• DIN 51524 Part 1, Hydraulic Oils, Type HL
• Elliott ring-oiled turbines, where mineral-based turbine oil is specified
• General Electric GEK 101941a, GEK 107395a, GEK 32568j, GEK 46506e, GEK 27070 (obsolete), GEK 28143b (obsolete)
• ISO 8068, Type L-TGB, Type L-TGSB
• Siemens Power Generation TLV 9013 04 (approved), TLV 9013 05
• Siemens Westinghouse 21T0591 (obsolete), 55125Z3 (obsolete)
• U.S. Military MIL-PRF-17672D, Symbol 2075 T-H (ISO VG 32), 2110 T-H (ISO VG 46), 2135 T-H (ISO VG 68)
• U.S. Steel 126
| ISO Grade | 46 |
| Specific Gravity @ 60°F | 0.868 |
| Density, lbs/gal @ 60°F | 7.23 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 231 (448) |
| Pour Point, °C (°F) | -36 (-33) |
| Viscosity | |
| cSt @ 40°C | 46 |
| cSt @ 100°C | 6.8 |
| SUS @ 100°F | 237 |
| SUS @ 210°F | 49 |
| Viscosity Index | 102 |
| Acid Number, ASTM D974, mg KOH/g | 0.14 |
| Air Release, ASTM D3427, minutes | 2.2 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 15 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172, Scar Diameter, mm | 0.5 |
| Oxidation Stability | |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 10 |
| TOST, ASTM D943-04a, hours | >24,000 |
| RPVOT, ASTM D2272, minutes | >1,700 |
| Rust Test, ASTM D665 A&B | Pass |
| Cleanliness Code, ISO 4406:1999 | 18/16/13 |
Diamond Class AW Turbine Oil meets the requirements of the following industry and OEM specifications:
• ABB G12106
• Alstom Power HTGD 90 117, for turbines without gear drives
• ASTM D4304-06a, Type II Turbine Oil
• British Standard 489
• Cincinnati Machine P-38 (ISO VG 32)
• DIN 51515 Part 1, Lubricating Oils, Type L-TD
• DIN 51515 Part 2, Lubricating Oils, Type L-TG
• DIN 51517 Part 2, Lubricating Oils, Type CL
• DIN 51524 Part 1, Hydraulic Oils, Type HL
• Elliott ring-oiled turbines, where mineral-based turbine oil is specified
• General Electric GEK 101941a, GEK 107395a, GEK 32568j, GEK 46506e, GEK 27070 (obsolete), GEK 28143b (obsolete)
• ISO 8068, Type L-TGB, Type L-TGSB
• Siemens Power Generation TLV 9013 04 (approved), TLV 9013 05
• Siemens Westinghouse 21T0591 (obsolete), 55125Z3 (obsolete)
• U.S. Military MIL-PRF-17672D, Symbol 2075 T-H (ISO VG 32), 2110 T-H (ISO VG 46), 2135 T-H (ISO VG 68)
• U.S. Steel 126
| ISO Grade | 68 |
| Specific Gravity @ 60°F | 0.872 |
| Density, lbs/gal @ 60°F | 7.26 |
| Color, ASTM D1500 | 0.5 |
| Flash Point (COC), °C (°F) | 243 (469) |
| Pour Point, °C (°F) | -30 (-22) |
| Viscosity | |
| cSt @ 40°C | 68 |
| cSt @ 100°C | 8.8 |
| SUS @ 100°F | 352 |
| SUS @ 210°F | 55.9 |
| Viscosity Index | 102 |
| Acid Number, ASTM D974, mg KOH/g | 0.1 |
| Air Release, ASTM D3427, minutes | 2.2 |
| Copper Corrosion, ASTM D130 | 1a |
| Demulsibility, ASTM D1401, minutes to pass | 15 |
| Foam Test, ASTM D892, Seq. I, mL | 0/0 |
| Four-Ball Wear, ASTM D4172, Scar Diameter, mm | 0.5 |
| Oxidation Stability | |
| FZG Scuffing Test, ASTM D5182, Failure Load Stage | 10 |
| TOST, ASTM D943-04a, hours | >24,000 |
| RPVOT, ASTM D2272, minutes | >1,700 |
| Rust Test, ASTM D665 A&B | Pass |
| Cleanliness Code, ISO 4406:1999 | 18/16/13 |
